2 1/2" Tri-Clamp 45 Degree Elbow (2KMP-2.5)

Securely Connect Separate Sanitary Line Feeds with Stainless Steel 45º Tri-Clamp Elbow

• Tri-Clamp 45º Elbow
• Available in 304 & 316L Stainless Steel
• Surface Finish: 32Ra (20Ra and 15Ra Available)
• 3-A Sanitary Standards for Sanitary Fittings, Number 63-04

The 45-degree Tri-Clamp elbow comes in 304 and 316L stainless steel alloy options. In order to ensure proper fastening at the connections, users should utilize clamp fittings like the bolted clamp and single pin heavy-duty clamp that has an attached wing nut as well as using rubber gaskets. This item has a 3A certification that confirms its compliance with sanitary-grade line processing equipment standard.

Product Overview

The Eagle 45° Sanitary Tri-Clamp Elbow is an ideal joint to connect two sizes of stainless steel pipes at a precise angle of 45 degrees. Made from seamless 304 or 316L stainless steel with 32Ra electropolished interior, it provides a smooth and crevice-free flow path that is resistant to bacterial growth and easy to clean during CIP operations. The Tri-Clamp bevel seat ends meet the requirements stipulated in 3-A Sanitary Standard 63-04, ensuring that they are interchangeable with industry-standard clamps and gaskets. The fittings carry a heat lot number and can be traced back to the original mill heat, meeting the requirements set for food and pharmaceutical industry products. The 45° angle is preferred in cases when gentle changes in location reduce the turbulence of flow and allow for gravity drainage.

Technical Specifications

• Size Range: 1.0" to 4.0"
• Material: 304 or 316L Stainless Steel
• Surface Finish: 32Ra Electropolished (20Ra and 15Ra Available)
• Connection Type: Sanitary Tri-Clamp (Bevel Seat)
• Angle: 45°
• Certification: 3-A Sanitary Standard 63-04
• Traceability: Stamped with Heat Lot Number
• Compatible Clamps: Single Pin Heavy Duty Clamp, Bolted Clamp

Key Advantages of Our 45° Tri-Clamp Elbow

Dimensions

Applications & Industries

Frequently Asked Questions

How do I determine the correct size for my application?

Choose the Tri-Clamp elbow size that corresponds with the outside diameter (OD) of the tube it will connect with. For instance, a 1.5-inch elbow connects to a 1.5-inch OD tube, which means that the relevant 1.5-inch clamp and gasket will be used for the connections. Additionally, the elbow's size should comply with the necessary flow rate. The fitting's internal bore should not present any obstruction for flow since it could impede the flow through the line, making it unsuitable for the intended use. For assistance in calculating how to choose a proper line size according to your flow rate and the viscosity of the product, reach to the engineering department, providing it with the specifications of your process.

What is the difference between a 45° elbow made from seamless tube and one made from welded plate?

The seamless tube elbow is manufactured by bending a segment of drawn stainless steel tubing that has a uniform grain structure as well as a uniform wall thickness through the elbow bend. The elbow made of welded plate is produced by cutting and forming two halves of the plate and welding them together. The seamless type of elbow is preferred in sanitary applications because it does not include the longitudinal weld seam on the inner side of the elbow bend, which can be a possible crevice, discontinuity, and point of corrosion. The seamless type of elbow also allows complete material traceability back to the original tube heat, which is important for pharmaceutical and food safety quality systems.

How do I properly assemble the Tri-Clamp connection on this elbow?

Insert a proper Tri-Clamp gasket situated between both the beveled seats of the elbow and the tri-clamp ferrule. Slide the clamp across both mating ferrule flanges evenly; secure and tighten wing nuts or bolts until the clamp is firmly in place i.e. the gasket is uniformly compressed all around its circumference; thereby making sure both ferrule faces are aligned to each other. The joint needs to undergo visual inspection during every CIP cycle for any sign of leakage or displacement of gasket.

Can this elbow be ordered in a custom angle other than 45°?

Certainly! 45-degree and 90-degree angles are the common elbow fittings, while the Eagle also produces custom elbow fittings at angles such as 30 degrees and 60 degrees to meet various piping layout needs. The creation of custom elbows normally requires a minimum order and the lead time can vary from 3 to 6 weeks depending on design complexity and the production schedule. Our engineers will work on your order together with consideration of the proper angle, size, material, and finish of the final product.

Why Choose Eagle Fittings

Request Custom Quote