2-1/2 in Threaded Butterfly Valve

$198.70

Size OD

2-1/2"

Grade

304 316L

Seal

EPDM Silicone FKM Viton

Product variants

Sanitary threaded butterfly valve for easy process control

Sanitary Threaded Butterfly Valve
304, 316L Stainless Steel
Operating Temperatures: 15° F – 200° F
Information supplied based on water media at 68°F
32Ra Finish (Roughness Average)
Field serviceable.

Thread Butterfly Valve comes with a pull-trigger locking mechanism to control process flow. This product comes standard in 304, 316L stainless steel alloy.

Optimized for systems requiring mid-range flow rates (200-350 GPM) with uncompromised reliability, this valve excels in:

Craft brewery CIP/SIP processes

Pharmaceutical pure water distribution

Light industrial steam condensate lines

Laboratory chemical dosing systems

Hybrid Threaded Design

Dual Thread Standards: Seamlessly connects to NPT (ANSI) or BSPT (DIN) piping without adapters – cuts retrofit costs by 35%.

Low-Profile Body: 30% shorter than ISO 5752 dimensions – fits cramped valve pits or mobile processing skids.

Pharmaceutical-Grade Performance

Electropolished 316L SS (Ra ≤0.5μm) exceeds ASME BPE-2019 standards for biofilm resistance.

Steam-Clean Ready: Sustains 30-minute SIP cycles at 285°F (141°C) with zero seal deformation.

Ergonomic Manual Control

Low-Torque Gearbox: 20:1 reduction ratio enables single-hand operation (≤15 lb-ft torque).

Position Locking Lever: Secures valve at 15° increments for precise flow modulation.

Dimension

Size	D1	D	L	L1	H	K×K
1/2"	12.7	78	100	126	86	8×8
3/4"	19	78	100	126	86	8×8
1"	25.4	78	100	126	86	8×8
1 1/	31.8	78	100	126	86	8×8
1 1/	38.1	86	100	126	90	8×8
2"	50.8	102	104	133	102	10×10
2 1/	63.5	115	112	144	109	10×10
3"	76.2	128	112	144	115	10×10
3.5"	89	139	120	144	123.5	11×11
4"	101.6	154	128	144	131	11×11
5"	127	185	160	220	146.5	11×11
6"	152.4	215	180	220	161.5	11×11
8"	203.2	285	180	284	199	14×14